Digital satellite receiver for digital TV and radio programs.

Main feature is the 400 MHz processor.

The Dreambox DM 500 HD supports the Linux TV API.

Experience high-definition TV with your Dreambox!

10/100 Ethernet compatible interface
HDMI connector
eSATA port

Technical Data

• 400 MHz MIPS Processor
• Linux Operating System
• 2-speed LED display
• MPEG-2 / H.264 Hardware Decoding
• Tuner: DVB-S2
• 1 x Smartcard-Reader (Dreamcrypt CA)
• eSATA
• Service Mini-USB
• 10/100Mbps Ethernet Interface
• 1 x Scart (RGB, CVBS, YUV or S-Video)
• HDMI
• Analog Modem
• S / PDIF Optical Connector
• 64 MB Flash, 256 MB RAM

 

• Unlimited channel list for TV / Radio
• Channel change in less than a second
• Automatic channel scan
• Support of bouquet-lists
• Support of EPG (electronic program guide)
• Teletext Decoder
• Support of multiple LNB-Switching control (DiSEqC)
• OSD in many languages ​​and skin-support
• External 12V power supply

 

DreamBox DM 500 HD Specifications

DBS-Tuner DVB-S2

• Input frequency range: 950 ... 2150 MHz
• Demodulation: DVB-S (QPSK), DVB-S2 (8PSK, QPSK)
• Symbol Rate: DVB-S: 2 ... 45 Mbaud / s, SCPC / MCPC
• DVB-S2: 10-31 Mbaud / s (8PSK), 10 - 30 Mbaud / s (QPSK)

 

Video Decoding

• Video Compression: MPEG-2 and MPEG-1 compatible, H.264
• Picture Format: 4:3 / 16:9
• Letterbox for 4:3 TV-Device

 

Audio Coding

• Audio Compression: MPEG-1 & MPEG-2 Layer I and II
• Audio Mode Dual (main / sub), Stereo
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

 

Analog Output

• Output Level L / R 0,5 Vss on 600 Ohm
• THD > 60 dB (1 kHz)
• Crosstalk <-65 dB

 

Digital Output

• Output Level: 0.5 Vpp into 75 Ohm
• Sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz
• S / PDIF Output optical, Toslink

 

Video output

• Output Level: 1 Vss + / - 0.3 dB on 75 Ohm

 

Video Parameter

• Input Level: 1 Vss + / - 0.3 dB on 75 Ohm
• Teletext filter in conformity with ETS 300 472 Standard

 

TV-Scart

• Output: FBAS, YUV,RGB, S-Video

 

Mini USB Service Interface

• Function: Firmware-Update

 

Ethernet

• 10/100 MBit compatible interface
• Function: Firmware-Update

 

Analog Modem

• Analog modem for Internet access

 

LNB Power Supply

• LNB Current 500mA max.; Short-circuit proof
• LNB Voltage vertical <14V without load,> 11,5 V at 400mA
• LNB Voltage horizontal <20V without load,> 17,3 V at 400mA
• LNB power off in standby mode

 

Number of active satellite positions

• DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control

 

Power Consumption

<12W at 12V in operation
<1W Standby

 

Input Voltage

External power supply:
      Input:
      110-240V AC / 50-60Hz / 0,6 A
      Output:
      12V = / 3,0 A

 

General

Ambient Temperature: +15 ° C. .. +35 ° C
Humidity: <80%
Dimensions: (W x D x H): 195 mm x 130 mm x 40 mm